Features of the 1933 Chevy Truck Radiator for Street Rods include:
- Modern efficient copper core design with 10 fins per inch
- Cores are available in a 1-13/16" 2 row core or a 2-5/8" 3 row core
- 3/4" seamless weld tubes in a staggered array to disrupt airflow laterally
- Die stamped top tanks
- Galvanized steel sidewalls to resist rust
- Internal baffle in top tank to prevent cooling loss
- Radiators are built from original patterns
- Painted flat black to aid in heat exchange
Note: The 1933 Chevy truck used a frame-to-frame crossing support channel that connects the headlight mounts. To grow the core beyond the 2-1/8"requires removal of the center section of this bar. Please review the core depth and advise at the time of ordering if there will be any interference concerns. To contain the fabrication time (cost) we have remove the top brackets that require a tank relief. This leaves 4 side mounts, two bolted bottom mounts, a neck and 2 hoses to keep the radiator in place.
About the ordering process:
Please note that the pictures shown illustrate past radiators. The order form below will assist in building your custom radiator.
We do not stock radiators. Each radiator is made to order and requires time to construct. Please plan accordingly.
Please note any special requirements in the comments section e.g. angled inlets, chopped radiators, maximum depths with core, fan or fan shrouds, patina-not-painted finish, polished brass or german silver etc.
Submitting an order for a custom radiator through our website will generate a deposit payment.
We will price out your custom modifications and you may be asked further questions while a drawing is prepared for your approval.
We will do our best to estimate the time of construction. It is a best estimate based on what is presently in our queue.
If you would like to speak with us before ordering you may create an account and save the item shopping cart. We can discuss it before you submit your order and deposit.
Keeping the Honeycomb core: Aging engines tend to run hotter. One contributing factor is decreased flow through a clogged and dirty honeycomb core. Honeycomb cores are comprised of narrow passages that can clog with rust, sediment or get coated over time with hard scale or oil from the engine.
This type of replacement falls into the restoration side of our business. If you wish to replace your early Chevy Harrison honeycomb core radiator with a new honeycomb core, then please select the link to the left and contact us for a quote.
What is a Honeycomb Fascia?
The Harrison Radiator Company of Lockport, NY supplied Chevrolet with honeycomb film cores until 1933. This core pattern is still available albeit more expensive than more conventional tube and fin core patterns. An aluminum fascia is available that when placed in front of the modern tube and fin core has ¼” depth and a ¼” hexagon pattern to hide the modern core. Moving the core back in the radiator’s header and sidewalls encroaches 1/16” of an inch toward the engine leaving adequate room for the fan clearance. When approached from the sides and front the tighter fin density and black on black paint create the illusion of a more costly honeycomb. Great for restorers on a budget and nostalgic street rodders.