1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure
1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure

1928-1929 Ford "Extreme Touring" 11FPI Radiator with pressure

28-29FT 11 FPI EXTREME TOURING with Pressure

Regular price $1,129.00

Did we need to make a radiator with even more copper?  Probably not but we did it anyway. It needed a name and though we like the "I-never-want-to-worry-about-overheating-again" radiator we settled on "Extreme Touring."  Then a customer called and said, "can I get that with pressure?"  You bet!

This radiator is intended as a drop in replacement for the 1928 and 1929 Ford car or car based pick-up truck and set-up for the OE engine in its production year.  It has essentially the same "high efficiency" radiator or "modern" core design as our popular HI Efficiency core but we add even more copper.  From 6FPI to 11FPI equates to an 83.3% increase in copper fin. The highly elliptical tube shape provides equal volumetric throughput but increases tube surface area by 293% thus requiring fewer tubes and still achieving better heat exchange. Other features include a deep drawn tank with an OE stamp pattern, electric wire tabs, galvanized steel sidewalls, and riveted brackets for a longer life. 

Features of the 1928 & 1929 Model A and Model AA Extreme Touring radiators:

  • Modern efficient copper core design with 11 fins per inch
  • Louvers embossed between each fin to disrupt air flow & facilitate heat transfer
  • 3/4" seamless weld tubes in a staggered array to disrupt airflow laterally
  • Die stamped three piece brass top tanks with model correct die stampings
  • Galvanized steel sidewalls to resist rust
  • Sidewalls available with relief like OE (upon request) 
  • Cowl rod bracket for support rods to firewall
  • Internal baffle in top tank to prevent coolant loss
  • Correct angle on lower outlet to clear power house generators
  • Electric wire tabs soldered to lower tank
  • Hood mount tabs soldered to top tank
  • Painted flat black to aid in heat exchange
  • Filler neck and overflow tanks (sold separately) will be on driver's side unless noted.

Our 1928 and 1929 Model A and Model AA truck reproductions are aftermarket products.  The design is based upon original drawings provided by Ford and original radiators we have collected over the last 45 years.  Each radiator is tested with an original Ford shell to assure general fit, appropriate neck placement and accurate mounting bracket placement. Each 1928-1929 radiator is also tested with an original 1928 steel fan shroud to assure fitment.  If for any reason you are not satisfied with the fit, finish, design or craftmanship the radiator may be returned to us postage pre-paid in new and re-saleable condition for a refund.

For a little more money, you may also consider our 28-29RT with round tubes for more authentic look.

1928-1929 Fords had many changes, read about the ones that cause people problems.  If you have modified or altered your vehicle in anyway, please order from the bespoke radiator section.  If you wish to restore your OE radiator using your OE tanks, brackets and/or castings please visit the restoration section of our website to begin the process.

Made in the USA (and made with 99.99% North American sourced materials!)

We make to order. Please allow adequate time for us to build.

Build time estimates [August 2024]

Brass Model Ts 6-8 weeks

Black Model Ts FT 5-6 weeks - RT is 8 weeks

Model As 6-8 weeks

Heater cores 6-8 weeks

Model A and 32 Ford Street rods 8 weeks 

Common street rods 15 weeks

Tricky customs & restorations 4-4.5 months

We appreciate your patience as we continue to recruit and train new fabricators.